Thursday, July 10, 2014
Wednesday, July 9, 2014
Roughcut Coupler Mod Tutorial
MATERIALS
2x 1/2 CPVC couplers
2x 3/4 CPVC couplers
1x nerf Elite Roughcut
1x Hot Glue Gun
2x Hot Glue Sticks
Electrical Tape
Hammer
Dremel and Cutting bit
Thats about it. Lets start.
[IMG]http://i.imgur.com/ntmS5xl.jpg[/IMG]
Here is your internals. Take the barrell assembly out by turning the white peice to seperate the assembly from the slide and trigger.
[IMG]http://i.imgur.com/T90BwIS.jpg[/IMG]
Now take the barrells of of the plunger assembly. It should just slide off. Next take your 3/4 and 1/2" couplers and wrap the 1/2" couplers in E-Tape until you have to hammer them into the 3/4" couplers. They wont come out when you pull your barrells off the coupler. Try and make them even.
[IMG]http://i.imgur.com/cztEOFX.jpg[/IMG]
Now take your plungers and hot glue the coupler combination to the front of the plunger assembly. I know there are better options to hotglue but I only have hotglue at them moment. Expoxy would be better, but like I said I have none.
[IMG]http://i.imgur.com/kFbchpo.jpg[/IMG]
Now here comes the fun part. Take your dremel and cut the shell like so. This is so the Plunger assembly will fit in the shell.
[IMG]http://i.imgur.com/RVtF14D.jpg[/IMG]
Put the barrel assembly back on the rest of the internals. The white piece you turned earlier to get the plungers off is a pain to put back on. You have to turn it and push the orange pieces apart a bit to get it in the groove.
When you put the shell back on and screw it back together it should look like this.
[IMG]http://i.imgur.com/sjCvpML.jpg[/IMG]
The whole blaster
[IMG]http://i.imgur.com/PQplWWk.jpg[/IMG]
Comments and Criticism welcome.
2x 1/2 CPVC couplers
2x 3/4 CPVC couplers
1x nerf Elite Roughcut
1x Hot Glue Gun
2x Hot Glue Sticks
Electrical Tape
Hammer
Dremel and Cutting bit
Thats about it. Lets start.
[IMG]http://i.imgur.com/ntmS5xl.jpg[/IMG]
Here is your internals. Take the barrell assembly out by turning the white peice to seperate the assembly from the slide and trigger.
[IMG]http://i.imgur.com/T90BwIS.jpg[/IMG]
Now take the barrells of of the plunger assembly. It should just slide off. Next take your 3/4 and 1/2" couplers and wrap the 1/2" couplers in E-Tape until you have to hammer them into the 3/4" couplers. They wont come out when you pull your barrells off the coupler. Try and make them even.
[IMG]http://i.imgur.com/cztEOFX.jpg[/IMG]
Now take your plungers and hot glue the coupler combination to the front of the plunger assembly. I know there are better options to hotglue but I only have hotglue at them moment. Expoxy would be better, but like I said I have none.
[IMG]http://i.imgur.com/kFbchpo.jpg[/IMG]
Now here comes the fun part. Take your dremel and cut the shell like so. This is so the Plunger assembly will fit in the shell.
[IMG]http://i.imgur.com/RVtF14D.jpg[/IMG]
Put the barrel assembly back on the rest of the internals. The white piece you turned earlier to get the plungers off is a pain to put back on. You have to turn it and push the orange pieces apart a bit to get it in the groove.
When you put the shell back on and screw it back together it should look like this.
[IMG]http://i.imgur.com/sjCvpML.jpg[/IMG]
The whole blaster
[IMG]http://i.imgur.com/PQplWWk.jpg[/IMG]
Comments and Criticism welcome.
Welcome to my Blog
I will be posting mods reviews and tutorials on this blog. For more mods and homeades than I could ever expect to put on here go to nerfhaven.com You will find anything about nerf blasters you could want to know.
Subscribe to:
Posts (Atom)